GE Simon Security System, Руководство по установке

Страница: 61 / 68

Simon Security System 54
System Access Codes
The factory default settings are 4-digit access codes, but the default codes will change whenever
Option 54 (Access Code Length) is reset. The default for each access code length is listed.
32 PIR motion sensor or sound sensor‡ No report Silent I No No 01234
34 Carbon Monoxide Alarm Emergency I Yes Yes 01234
35 Entry/Exit Delay Interior PIR Motion Intrusion S No Yes 234
36 Special Intrusion: such as gun cabinets and wall safes. Reports as tamper if tripped. Intrusion I Yes Yes 1234
37 Light Switch Control: X10 Modules turn either on or off when a door is opened. No
report. Silent I No Yes 01234
38 Auxiliary: Water Sensors. Trouble Beeps I Yes Yes 01234
Sensor Group Characteristics
Ty
p
e
Name/Application Siren Type
De
la
y
R
est
or
al
S
upe
rv
is
or
y
Active
in
Levels
* This type is not certified as a primary protection circuit for UL-listed systems and is for supplementary use only.
§ This type is required for UL-listed residential fire alarm applications.
‡ This type has not been investigated by UL.
Delays:
I = Instant Delay (no delay, immediate alarm)
S = Standard Delay (alarm sounds after programmed entry delay time)
F = Follower Delay (alarm sounds immediately if entry/exit delay is not active, otherwise alarm sounds after programmed
entry delay time)
Home Control Planning Table
Module Activated by Time Activated
Unit # Type Location Sensor Entry/Exit Start Time Stop Time
Example Lamp Hall lamp Motion Yes 8 p.m. 10:30 p.m.
1
2
3
4
5
6
7
8
System Access Codes
Type Default
a
Installer Settings
Utility Access Code 1 654321, 54321, 4321, or 321
Utility Access Code 2 654321, 54321, 4321, or 321
Master Access Code 123456, 12345, 1234, or 123