GE Simon Security System, Руководство по установке

Страница: 26 / 68

Simon Security System
19
1. Press Add.
2. Press Light Control repeatedly until you hear the desired house code letter.
3. Press DONE.
4. Set the HOUSE dial on each lamp, appliance, and universal module, to the same
letter.
5. Set the HOUSE dial on powerhorn/remote sirens to the next sequential alphabetical
letter.
¾
To add an entry/exit activated module:
1. Press A
DD
.
2. Press Light Control.
3. Press Unit # repeatedly until you hear the unit number that matches the one you
chose for the module.
4. Press Entry/Exit Delay. The panel confirms your programming.
¾
To add a sensor-activated module:
Note
A Keychain Touchpad button
can also be programmed to
control a light or appliance
module.
1. Press A
DD
.
2. Press Light Control.
3. Press Unit # repeatedly until you hear the unit number that matches the one you
chose for the module.
4. Press Sensors until you hear the sensor you want to control the light.
5. Press DONE. The panel confirms your programming.
¾
To add a time-activated module:
1. Press Add.
2. Press Light Control.
3. Press Unit # until you hear the unit number that matches the one you chose on the
module.
4. Press Time.
5. Press Hours and Minutes to set the beginning of the schedule.
6. Press DONE.
7. Press Hours and Minutes to set the end of the schedule.
8. Press DONE. The panel confirms your programming.
¾
To delete an Entry/Exit-activated module:
1. Press Delete.
2. Press Light Control.
3. Press Unit # repeatedly until you hear the unit number you want deleted.
4. Press Entry/Exit Delay, then press DONE. The panel confirms your program-
ming.
¾
To delete a sensor-activated module:
1. Press Delete.
2. Press Light Control.
3. Press Unit # repeatedly until you hear the unit number you want deleted.
4. Press Sensors until you hear the one you want deleted.
5. Press DONE. The panel confirms your programming.
¾
To delete a time-activated module:
1. Press Delete.
2. Press Light Control.
3. Press Unit # repeatedly until you hear the unit number you want deleted.
4. Press Time.
5. Press DONE. The panel confirms your programming