manualshive.com logo in svg

GE Simon Security System, Руководство по установке

Поделиться
Скачать
GE Simon Security System Скачать руководство пользователя страница 35

Simon Security System

28

Note  
When this feature is on, the 
system must be disarmed 
before entering the pre-
mises, since it is disabling 
the Entry Delay. If Option 58: 
Remote Touchpad Arming is 
on, keychain touchpads can-
not disarm the system and 
will cause an alarm upon 
entering.

¾

To turn on No Delay from Keychain Touchpad, press:

Add—Option #—28—DONE.

¾

To turn off No Delay from Keychain Touchpad, press:

Delete—Option #—28—DONE.

Option 29: Panel Piezo Alarms (Default = on)

Determines whether the panel piezo emits alarm sounds (on) or not (off).

Note  
For UL listed systems where 
this option is off, at least one 
UL listed external audible 
signal device must be used 
and Option 53: Hardwire 
Siren Supervision must be 
on.

¾

To turn on Panel Piezo Alarms, press:

Add—Option #—29—DONE.

¾

To turn off Panel Piezo Alarms, press:

Delete—Option #—29—DONE.

Option 30: Panel Panic Alarms (Default = on)

Determines whether the panel panic buttons (police, auxiliary, and fire) activate alarms 
when pressed (on), or not (off).

¾

To turn on Panel Panic Alarms, press:

Add—Option #—30—DONE.

¾

To turn off Panel Panic Alarms, press:

Delete—Option #—30—DONE.

Option 31: Downloader Enable (Default = on)

Determines whether the panel can be accessed using ToolBox (on), or not (off).

¾

To turn on Downloader Enable, press:

Add—Option #—31—DONE.

¾

To turn off Downloader Enable, press:

Delete—Option #—31—DONE.

Option 32: 300 Baud (Default = on)

Determines whether the baud rate used by the panel for central station or ToolBox 
communication is 300 bps (on) or 110 bps (off).

¾

To turn on 300 Baud, press:

Add—Option #—32—DONE.

¾

To turn off 300 Baud, press:

Delete—Option #—32—DONE.

Option 33: Audio Verification (Default = off)

Note  
For this option to work cor-
rectly, the panel must have a 
2-way voice microphone or 
an Interrogator 200 Audio 
Voice Module attached.

Determines whether the system can perform 2-way voice audio sessions with a central 
station operator (on), or not (off).

Note  
Panel voice announcements are silenced during audio sessions. If the operator does not ter-
minate the session correctly, panel announcements may not occur for up to 90 seconds after 
the operator hangs up. If this option is off, Option 47: AVM Mode and Option 48: Panic 
Talk—AVM will not work.

¾

To turn on Audio Verification, press:

Add—Option #—33—DONE.

¾

To turn off Audio Verification, press:

Содержание Simon Security System





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды