GE Simon Security System Скачать руководство пользователя страница 57

Страница: 57 / 68

Simon Security System

Panel announces that a sensor is open.

•

See Sensors section below.

Panel announces System time is not set.

•

Set the system time.

Control Panel

Panel announces Function not available when Chime Doors is pressed.

•

No sensors are programmed using sensor type 10 or 13.

Panel announces Function not available when Chime Special Motion is pressed.

•

No sensors are programmed using sensor type 25.

Panel announces Function not available when LIGHTS Time Activated is pressed.

•

No time activated lights have been programmed.

Panel announces Function not available when LIGHTS Sensor Activated is pressed.

•

No sensor activated lights have been programmed.

Panel announces Invalid. Sensor already programmed as Sensor Name.

•

This sensor is already programmed. Delete sensor if not correctly programmed.

Options (Programmable by the homeowner)

Panel does not beep.

•

Turn on (add) Option 1.

Latchkey does not function.

•

Latchkey time (option 3) is not set. Set Latchkey time.

•

Latchkey is not enabled. Enable Latchkey by pressing ARM Motion Sensors
twice.

•

The phone number is not programmed properly. Reprogram the phone number.
(options 13 or 43)

•

System Time is not set. Set system time.

Sensors

A sensor does not work.

•

Make sure the battery is good and installed correctly.

•

Check for interference from metal objects. Move or rotate the sensor.

•

Move the sensor to a new location.

Door or window is closed, but the panel announces it is open.

•

Be certain the arrow on the magnet and the guide line on the transmitter are
aligned and within 1/4 inch of each other.

•

The sensor tamper switch may be open (cover off).

Motion sensors go off continuously.

•

Be sure the sensor is mounted on a solid surface and the viewing field is free from
sources of changing temperature.

Motion sensor does not respond to motion.

•

Make sure the sensor battery is good and installed correctly. Wait 2 minutes after
installing a new battery to test the sensor.

•

Adjust the sensor mounting.

•

Leave the area for 3 minutes, then retest.

•

The environment is too hot or too cold. Outdoor sensors will operate between 32°

and 120°F.

Содержание Simon Security System





































































Результаты поиска

Содержание Simon Security System

Отзывы:

Бренды по названию

Популярные бренды

GE Simon Security System, Руководство по установке

Результаты поиска

Содержание Simon Security System

Отзывы:

Бренды по названию

Популярные бренды