
10–6
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL
CONFIGURING PORT VLANS THROUGH THE COMMAND LINE INTERFACE
CHAPTER 10: VLAN
To save VLAN configuration:
save
To edit VLANs:
edit
id=<vlan Id> [name=<vlan name>] port=<number|list|range>
To display the VLAN information:
show vlan
type=<port|tag> [<id=vlanid>]
The following command sequence shows how to configure VLANs on a MultiLink ML810
Managed Edge Switch.
ML810#
vlan type=port
ML810(port-vlan)##
add id=2 name=test port=1-7
ML810(port-vlan)##
start vlan=all
ML810(port-vlan)##
save
Saving current configuration...
Configuration saved
To move Management Control on any VLAN:
add
id=<vlan Id> [name=<vlan name>] port=<number|list|range>
[Forbid=<number|list|range>]
[<mgt|nomgt>]
To enable or disable Management Control on any VLAN:
edit id=<vlan Id>[name=<vlan name>][port=<number|list|range>
[<mgt|nomgt>]
Содержание MultiLink ML810
Страница 36: ...1 26 MULTILINK ML810 MANAGED EDGE SWITCH INSTRUCTION MANUAL ML810 FIRMWARE UPDATES CHAPTER 1 SPECIFICATIONS ...
Страница 74: ...4 18 MULTILINK ML810 MANAGED EDGE SWITCH INSTRUCTION MANUAL TROUBLESHOOTING CHAPTER 4 OPERATION ...
Страница 328: ...18 38 MULTILINK ML810 MANAGED EDGE SWITCH INSTRUCTION MANUAL MEMORY MAPPING CHAPTER 18 MODBUS PROTOCOL ...