GE MultiLink ML810, Инструкция по эксплуатации, Страница: 124 / 348

6–16 MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL
CONFIGURING PORT SECURITY WITH ENERVISTA SOFTWARE CHAPTER 6: ACCESS CONSIDERATIONS
Severity has one of the following values, and depending on the severity type, is assigned a
severity level.
•
I
(information, severity level 1) indicates routine events.
•
A
(activity, severity level 2) indicates the activity on the switch.
•
D
(debug, severity level 3) is reserved for GE Digital Energy internal diagnostic
information
•
C
(critical, severity level 4) indicates that a severe switch error has occurred.
•
F
(fatal, severity level 5) indicates that a service has behaved unexpectedly.
6.3.3 Authorized Managers
Just as port security allows and disallows specific MAC addresses from accessing a
network, the EnerVista Secure Web Management software can allow or block specific IP
addresses or a range of IP addresses to access the switch.
 Access this functionality via the Configuration > Access > IP Access
menu item.
The window above show the authorized access list for managing the switch. Note specific
services can be authorized. Also note that individual stations or a group of stations with IP
addresses can be authorized.
NOTE
Note
It is assumed that users are familiar with IP addressing schemes (e.g. class A, B, C etc.),
subnet masking and masking issues such as how many stations are allowed for a given
subnet mask.
In the following example, any computer on 10.10.10.0 sub network is allowed (note how
the subnet mask is used to indicate that). Also, a specific station with IP address
192.168.15.25 is allowed (again note how the subnet mask is used to allow only one
specific station in the network) and an older station with IP address 192.168.15.15 is
removed.