GE MAC 800, Руководство оператора

Страница: 53 / 154

Recording a Resting ECG
4. Adjust the Speed , Gain , and Low Pass Filter until the waveforms are configured
as desired.
For more information, refer to “ECG Options” on page 53 .
5. If the patient has a pacemaker, press F5 to turn on Pace Enhance .
For more information, refer to “ECG Options” on page 53 .
6. Press Leads to scroll through the leads or change the lead format.
For more information on display formats, refer to “Resting ECG Setup” on page
91 .
7. When the waveforms are configured, press ECG to begin the acquisition.
A progress bar indicates the percentage of the data acquired. When the
acquisition is complete, one of the following occurs, depending on the setting of
the
Preview Before Analysis option on the Resting ECG Setup window.
• If the Preview Before Analysis option is enabled, a preview of the 10–second
ECG is displayed. Proceed to step 8 .
• If the Preview Before Analysis option is not enabled, the ECG data is analyzed
and printed after it is acquired. Continue with step 9 .
8. While reviewing the preview, do one of the following:
• Discard the reading and begin over by pressing F3 ( Cancel ) and repeat from
step 4 .
• Accept the reading by pressing F4 ( Continue ).
The menu options change to allow you to manage the acquisition. Proceed
to step
9 .
• If the Laser Printer (LPRT) option is enabled, you can press Laser Printer to
print the reading to a laser printer attached to the device.
The ECG is printed on the laser printer. You return to the main ECG screen,
where you can take another ECG.
9. Use the options to change patients or print a copy, or to save, transmit, or
reanalyze the data.
For more information on each option, refer to “Post-Acquisition Options” on
page 56 .
ECG Options
This system provides several options for configuring an ECG. The options, presented as
option keys across the bottom of the display, are listed in the following tables.
2060026-001C MAC™ 800 53