GE MAC 800, Руководство оператора

Страница: 47 / 154

4
Entering Patient Information
Entering Patient Information Manually
Patient information should be entered for each new patient from whom readings
are taken. Use the following procedure to enter the information if you do not use
a barcode reader or if you want to modify or add to the patient data entered with
a barcode reader.
CAUTION:
ACCURATE PATIENT INFORMATION — Patient information may be retained from a
previous patient. Be sure to check the patient information screen for each new
patient. Data assigned to the wrong patient causes erroneous patient information
that can affect diagnosis and treatment of the patient(s).
Make sure that you enter patient information for the correct patient.
1. Open the Enter Patient Data window.
To open the window for Resting ECG and RR Analysis , press F3 ( Patient Data ).
For Arrhythmia ECGs, the window opens automatically when you initially select
the application.
For subsequent patients, press Stop Recording > Confirm Stop > More > Start
Recording > New Patient to reopen the Enter Patient Data window.
NOTE:
The Patient List is available only if the optional internal storage is enabled.
If you select a patient from the patient list, only the first page of patient
information is reused: you must manually reenter all subsequent pages.
2. Enter the necessary patient information or press F1 Patient List to select a
patient from a list of patients.
NOTE:
If the Test Patient setting has been enabled in System Configuration >
Basic Setup , the F1 ( Patient List ) setting will be disabled.
Refer to “Entering Data Using the T9 Key” on page 40 for additional information
on entering data.
2060026-001C MAC™ 800 47