Introduction
WARNING:
SHOCK HAZARD — Improper use of this device presents a shock hazard. Strictly
observe the following warnings. Failure to do so may endanger the lives of the
patient, the user, and bystanders.
When disconnecting the device from the power line, remove the plug from the
wall outlet first, before disconnecting the cable from the device; otherwise, there is
a risk of coming in contact with line voltage by inadvertently introducing metal
parts in the sockets of the power cord.
Devices may be connected to other devices or to parts of systems only after
making certain that there is no danger to the patient, the operators, or the
environment as a result. Standards IEC 60601-1-1/EN60601-1-1 must be
complied with in all cases.
WARNING:
DROPPING HAZARD — For devices installed above the patient, adequate
precautions must be taken to prevent them from dropping on the patient.
WARNING:
PACKAGING DISPOSAL — Dispose of all packaging material, observing all
applicable waste control regulations and keeping out of children’s reach.
WARNING:
ELECTRIC SHOCK — To reduce the risk of electric shock, do NOT remove cover
(or back).
Refer servicing to qualified personnel.
WARNING:
BURN PROTECTION — To ensure defibrillator protection and protection against
high-frequency burns, use only GE Healthcare-recommended cables and
leadwires.
Otherwise, serious injury could result.
WARNING:
HIGH-FREQUENCY PRECAUTIONS — Do not use the device with high-frequency
surgical devices.
CAUTION:
PROPER LEADWIRE CONNECTION — Improper connection will cause inaccuracies
in the ECG.
Trace each individual leadwire from its acquisition module label to the colored
connector and then to the proper electrode to ensure that it is matched to the
correct label location.
CAUTION:
TRIPPING HAZARD — To avoid tripping injuries, keep patient cables off the floor
and route them away from patient legs and the healthcare provider’s work area.
CAUTION:
BEFORE INSTALLATION — Compatibility is critical to safe and effective use of
this device. Please contact your local sales or service representative prior to
installation to verify equipment compatibility.
12
MAC™ 800
2060026-001C
Содержание MAC 800
