GE Logiq 500, Руководство пользователя

Страница: 141 / 579

Adding Color
LOGIQ 500 Basic Users Manual
2233658–100 Rev. 0
5–40

CFM Mode Sub-Menu Page 4 (cont’d)
Persistence MR-Flow
Description Retains the largest pixel color value until a
larger value is detected or preset time has
elapsed.
When a higher color value for a pixel is
detected, that value is retained and the
persistence time is reset for that pixel.
When the persistence time elapses for that
pixel, color is deleted and it returns to gray
scale.
Changes the number of focal zones in the
CFM area to 3. A graphic caret
corresponding to the focal zone position(s)
appears on the right edge of the image.
Allows for MR-Flow (ACE–2 option) to be
turned on or off from the Color Flow Menu.
Available only for LA39, C551 (CAE),
C358, E721, 739L and 546L probes.
Benefits Present a continuous, high sensitivity color
image. MR–Flow optimizes the image by
increasing the resolution for the color flow
window. Set to 3 focal zones to be
concentrated in the CFM area.
Allows for quick on/off of MR-Flow function
from CFM Sub-Menu. Requires ACE–2
option.
Values OFF No Persistence
SHORT Short Persistence time
MID Medium Persistence time
HIGH Long Persistence time
On and Off.
Affects on
Other Controls The activation of the Persistence function
will over ride any previous selections made
for CFM Capture or CFM B Frame
Average. When Persistence is
deactivated CFM Capture and CFM B
Frame Average will return to normal
operation.
3D Mode
Description Allows for 3D Mode activation from the
Color Flow menu.
Benefits Allows for quick on/off of 3D Mode function
from CFM Sub-Menu.
Values On and Off.