GE Innova IGS 620, Руководство по предварительной установке

Страница: 158 / 208

HEAT OUTPUT
Stand by
Moderate Use (8 cas‐
es / a 10 hour day)
Typical Use (13 cas‐
es / a 10 hour day)
Maximum Use (maxi‐
mum peak power dur‐
ing exam)
Room Core System kW BTU/hr kW BTU/hr kW BTU/hr kW BTU/hr
In room AW TFT monitor 0.12 409
Typical injector 0.09 320
LD Monitor 0.5 1706
Exam room total 1.3 4440
Ctrl
Room
AW work station 0.35 1201
2 AW TFT monitors 0.24 818
Printer 0.31 1054
LD Monitor (5) 0.5 1706
Ctrl room total 1.4 4779
Tech
Room
LD Cabinet 1.0 3412
3kVA Cabinet UPS -
model 9130 (4)
0.37 1257
Tech Room Total 1.37 4669
Typical configuration without fluoro
UPS
10.27 35173 15.15 51640 18.33 62493 23.39 79732
Note (1): Air flow requirements 1200 m 3 /h (706 CFM)
Note (2): For more details, consult appropriate pre–installation manual
Note (3): For UPS 20 kVA option refer to Section 3.2
Note (4): On batteries heat output = 0.52 kW / 1755 BTU
Note (5): The 2nd optional LD monitor is not necessarily in the control room. It may be installed in the exam room (outside patient
vicinity).
CAUTION
Make sure there is a ventilation air flow, preferably ensured by natural air flow,
otherwise by enforced ventilation, so that hydrogen concentration is below 1%
(according to Standard IEC 62040-1-2).
3.2 Fluoro UPS Option
Illustration 4-1:
Innova
TM
IGS 620, Innova
TM
IGS 630 Preinstallation Manual
Direction 5694389-1-1EN, Revision 2
158 3 Heat Output