GE Innova IGS 620, Руководство по предварительной установке

Страница: 38 / 208

3.2 Tools and Test Equipment
Refer to Table 1-2 . To obtain a list of tools and test equipment for components not specified in
Table 1-2 , refer to the appropriate component Pre-Installation Manual listed in Chapter 2,
System Compatibility .
Table 1-2:
PRODUCT OR COM‐
PONENT
TOOL OR TEST EQUIP‐
MENT
USED FOR SOURCE RECEIVED (DATE)
Frontal Positioner Service Engineer's Tool
Case
General Use 
Level, Protractor Type Positioner Checks 
Plumb Line included in
46-216640G1
Positioner Checks 
Torque Wrench 2 to 20
daN.m (15 ft. lbs. to 150
ft. lbs.)
Positioner Checks 
1/2 inch Ratchet Wrench
(2)
Raise and Lower Posi‐
tioner shipping dolly

Wrench, Spanner
(46-176584P1)
High Voltage Cable In‐
stallation

Laptop Computer (MS-
DOS Windows)
Positioner Configura-tion
and Calibration

Lateral Positioner Ladders Installation 
Lateral Positioner Tool‐
case (shipped with Lat‐
eral Positioner)
Installation 
5-axis Laser Alignment
tool (shipped with PIM
kit)
Installation 
Status Display Same as for Frontal Positioner (Service Engineer's Tool Case)
Omega Table Same as for Frontal Positioner (Service Engineer's Tool Case)



C2 Cabinet (Frontal and
Lateral)
Same as for Frontal Positioner (Service Engineer's Tool Case)


X-Ray Head Same as for Frontal Positioner (Service Engineer's Tool Case)


C1 Cabinet Same as for Frontal Positioner (Service Engineer's Tool Case)


Same as for Frontal Positioner (Service Engineer's Tool Case)
Innova
TM
IGS 620, Innova
TM
IGS 630 Preinstallation Manual
Direction 5694389-1-1EN, Revision 2
38 3 Delivery Requirements