5 Hook the hanger located on top of the Epi light to the top edge of the Epi light base.
1
2
Action
No.
Two guide holes are located on the back of the Epi light base.
1
Slide the hook after attaching the guide pins to the guide holes.
2
6 Push the Epi light while holding the latch open, and slide it inwards until a click sound is heard.
7 Lower the latch to lock the Epi light in place.
8 Repeat steps 4 - 7 for the opposite side.
Note:
• The Epi lights are clearly labelled L for the left and R for the right sides.
• Install the Epi lights in matching pairs only. If Epi lights with different wavelengths
are used, the intended image will not be obtained.
Getting Started with ImageQuant LAS 4000 28-9607-59 AB
41
3 Installation
3.5 Installation of hardware
3.5.6 Installing Epi light sources
Содержание ImageQuant LAS 4000
Страница 1: ...GE Healthcare Getting Started with ImageQuant LAS 4000 Original instructions...
Страница 2: ......
Страница 85: ......