4-26
15" QuickPanel* View & QuickPanel Control Loaded Color TFT
– December 2011
GFK-2402D
4
The QuickPanel View/Control provides two methods for setting an IP
address:
DHCP (Dynamic Host Configuration Protocol).
This is the default
method for Port 1 that is carried out automatically.
Note:
There must be a DHCP server on the connected network for a valid
IP address to be assigned. Contact your network administrator to
ensure correct DHCP server configuration.
Manual method.
This is the default method for Port 2. You uniquely
specify the numeric addresses for the QuickPanel View/Control, the
Subnet Mask, and the Default Gateway (if applicable).
Note:
Use a crossover cable to connect the QuickPanel View/Control
directly to a PC. When connecting to a LAN HUB, use a straight
through cable. Contact your network administrator for further
information.
Содержание IC754CSF15CTD
Страница 4: ......
Страница 15: ...GFK 2402D Chapter 2 Overview 2 3 2 and battery Physical Layout of QuickPanel View Control ...
Страница 36: ......
Страница 92: ......