GE Ettan IPGphor 3, Руководство пользователя прибора

Страница: 38 / 64

3
Operating instructions
38
Ettan IPGphor 3 Instrument User Manual 11-0034-58 Edition AB
3.5.2 Editing protocol parameters
All protocol parameters are set in the edit mode. Pressing the EDIT key toggles
between the first editable screen and the protocol identification screen. For each
protocol, the four different screens accessible in edit mode are:
This section covers the programming, editing, or verifying of all parameter
values
Selecting protocol
Select the protocol to be created or edited from the main screen :
1 Position the cursor under the protocol number field using the right and left
arrow keys.
2 Move to the desired protocol number using the up and down arrow keys.
3 The file name may be edited by using the right arrow to move into the file
name and up and down arrows to adjust the characters as desired. To skip
editing the name use the left arrow to proceed to the next line.
4 To change any letter, move the cursor to that location using the right and
left arrow keys and then scroll through the 37 available options using the up
and down arrow keys. Once the desired letter appears, move the cursor to
the next character to be set.
5 The original label “File #” occupies 6 of the 16 available characters. To
change the label to a more descriptive name, such as “11 CM 3–10L,”
requires scrolling through the alphanumeric options for each of the 11 digits
in the name.
Screen 1 Protocol number and name
Rehydration time, temperature
IEF run conditions (temperature and maximum
current/strip), number of strips and number of steps in the
selected protocol.
Screen 2–4 the nine steps available for IEF conditions (voltage change
pattern, voltage, and step duration) in groups of 3
P r o t # 1 F i l e 1
R e h y d r a t e 0 : 0 0 H r @ 2 0
˚
C
I E F @ 2 0
˚
C 5 0
µ
A / S t r i p
1 S t r i p s 0 S t e p s