GE DTR GEK-106305A Скачать руководство пользователя | Manualshive

Страница: 59 / 91

background image

6. HARDWARE DESCRIPTION

58

DTR Digital Tap Changer Controller

GE—106305A

6.1.6 PROTECTION CPU PROCESSING BOARD

This module is the main part of the equipment with reference to protection functions. The main functions are:

- Sampling of analog signals coming from magnetic module.

- Protection algorithm evaluation.

- Protection logic and auxiliary functions.

- Monitoring functions, events register, oscillography register, etc.

- Equipment self-check.

- Protection data communication to the communications CPU.

CPU module nucleus is a 16 bits microprocessor together with its auxiliary associated circuitry.

6.1.7 CPU COMMUNICATIONS BOARD.

Communications CPU module nucleus is very similar to the protection CPU module, and it also consists of a 16 bits
microprocessor together with the auxiliary electronic.

The main function of the communications CPU module is to maintain and control the communications in the following
channels:

- Internal communication with the protection and control CPU modules.

- Local mode communication with a PC by the front communications port.

- Remote mode communication by rear communication port.

- Man-machine interface by means of keypads and displays (alphanumerical and graphical).

6.1.8 DIGITAL INPUTS BOARD.

The design of the DTR has been done for assuring the maximum capacity of inputs by board, maintaining at the
same time the maximum reliability against electromagnetic disturbance.

Each of the board inputs has a resistive attenuate which adequates the external voltage battery levels (48 V, 125 V,
...) to the needs of the optocoupler that gives galvanic isolation to each input. As the majority of these inputs come
from elements that are connected to the substation equipment, together with the resistive attenuate one passive filter
is provided in order to get better behavior against electromagnetic perturbations.

Input modules (as well as the output ones), provide one selectable of 4 bits address, which allows to include several
modules of each kind in the same DTR unit.

«
...
57
58
59
60
61
...
»

Содержание DTR GEK-106305A




























































































Отзывы:

Нет отзывов

Похожие инструкции для DTR GEK-106305A

Бренд: Ohsung Electronics Страницы: 18

Бренд: VADDIO Страницы: 2

Бренд: Idesco Страницы: 11

Бренд: B meters Страницы: 2

Бренд: Daikin Страницы: 5

Бренд: H3C Страницы: 69

Бренд: Jedo Страницы: 26

Бренд: Paradox Страницы: 2

Бренд: Paradox Страницы: 44

Бренд: National Instruments Страницы: 72

Бренд: National Instruments Страницы: 41

MAGNUM ALERT 3000 FIRE ALARM

Бренд: NAPCO Страницы: 2

Бренд: Mitsubishi Страницы: 16

Бренд: SOMFY Страницы: 4

FX-COMM4NDER MFX3203

Бренд: Magicfx Страницы: 16

Бренд: IR-Tec Страницы: 14

Бренд: schmersal Страницы: 6

Бренд: u-blox Страницы: 157

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды