9100c
9-10
M1207026
9.5.3 Replace the
inlet manifold
1.
Remove the rear upper panel (Section 9.2).
2.
Disconnect the tubing from the manifold outlet(s).
3.
Remove the four screws (
A
) that hold the manifold to the side
extrution.
4.
Transfer the following item to the replacement manifold or install
new as required.
•
pipeline check valve (
1
)
•
inlet filter (
2
)
•
inlet fitting (
3
) and o-ring (
4
)
•
relief valve (
5
)
5.
To reassemble, perform the previous steps in reverse order.
6.
Perform the checkout procedure (Section 3).
1
2
3
4
5
A
M1207027
004
MANUAL−DOC, Technical Reference Manual, Technical Reference Manual for 9100c, English−default
Reproduced from the electronic master in MATRIX
