CS875-575-375-275-175 Installers Manual with CS5500 keypad
B.12.8
12.1.4.6
Access Without RTE
A menu entry that enables a user to open the door without a Request To Exit
(RTE).
12.1.4.7
Log Forced Entry
A menu option that records a force entry event in the event log.
12.1.4.8
Output Schedule Selection
A menu option that selects the schedule that is used by the selected proximity
reader. Up to eight schedules can run at the same time in a complementary
manner.
12.1.5
LED 1 (Green)
A menu entry that groups options that cause LED 1 to display a green light.
The proximity reader has a built-in LED (at the top of the reader) which can
display a green light or be turned off.
The LED follows the ready state or the state of the built-in relay in the proximity
reader. It is possible to invert the action that activates the LED.
12.1.5.1
Ready State
A menu option that lights LED 1 (Green) when the system is ready to be
armed.
12.1.5.2
Relay State
A menu option that lights the selected LED when the device’s relay is
activated.
12.1.5.3
Inverted
A menu option that lights the selected LED (Green/Red) when the device is in
inverted mode.
12.1.6
LED 2 (Red)
A menu entry that groups options that cause LED 2 to display a red light. The
proximity reader has a built-in LED (at the bottom of the reader) which can
display a red light or be turned off.
The LED follows the armed state or the state of the built-in relay in the
proximity reader. It is possible to invert the action that activates the LED.
12.1.6.1
Armed State
A menu option that lights LED 2 (Red) when the system is armed.
12.1.6.2
Relay State
A menu option that lights the selected LED when the device’s relay is
activated.
12.1.6.3
Inverted
A menu option that lights the selected LED (Green/Red) when the device is in
inverted mode.
12.1.7.1
Door Shunt Zone
A menu option that sets which zone senses that the door is open for door fault
alarms and warnings.
12.1.7.2
Request to Exit Zone
A menu option that selects the zone that is monitored to signal a Request to
Exit (RTE). You must enable the RTE zone type option for the selected zone.
12.1.7.3
Door Fault Warning Time
A menu option that sets the time after which a warning sound is made before a
door fault alarm occurs.
12.1.7.4
Door Fault Alarm Time
A menu option that sets the time within which the door must be closed before a
door fault alarm occurs.
12.1.7.5
Scan Time
A menu option that specifies the length of time during which the proximity card
must be held near the proximity reader to activate its functions. A proximity
reader can be programmed to activate different functions depending on
whether the card is held near it once, twice within this time or continuously for
this time.
12.1.7.6
Relay Active Time
A menu option that sets the length of time the relay is activated when a
proximity card is held against the proximity reader.
12.1.7.7
Partitions
A menu entry that lists the partitions assigned to the selected proximity reader.
The selected proximity reader can trigger an event on these partitions.
12.1.7.8
Logging Partition
A menu option that specifies the partition number that the proximity reader
adds to any event that it records in the event log.
12.1.8
Schedules
A menu option that, combined with Output Schedule Selection selects the
schedules that affect the proximity reader.
Location
Term
Definition
