GE Medical Systems LOGIQ ?200, Руководство по обслуживанию, Страница: 45 / 212

GE MEDICAL SYSTEMS
LOGIQ
α
200 SERVICE MANUAL
2138853
INSTALLATION
2–9
REV 5
2–2–5 Unpacking LOGIQ
α
200
CAUTION
Do not lift the unit by the Keyboard or Monitor arm. Equipment damage may result.
CAUTION
The unit weighs approximately 76 kg (168 lbs). Be prepared for a sudden shift of weight as
the unit is removed from its base (pallet).
Refer to ILLUSTRATION 2–2 while performing the following procedure.
1. Cut the two BANDs.
2. Lift the CAP up and off.
3. Lift the TOP PAD up and off.
4. Remove the OPTION BOX.
5. Remove the VINYL COVER.
6. Remove the MIDDLE PLATE ASSY.
7. Remove the MONITOR COVER.
8. Lift the PACKING CASE up and off.
9. Lift the Monitor up by pressing the <UP/DOWN> button located on the Monitor Arm.
10. Remove the MONITOR PAD.
11. Return the Monitor arm to its lowest position.
12. Carefully roll the LOGIQ
α
200 from the PALLET.
13. Remove the Caution Label attached on the CRT Filter and clean the CRT Filter.
Note
Check the shipping container for special instructions. Verify that the container is intact. In some
cases a secondary container may be used. If so, ask the carrier for unpacking instructions.