GE Medical Systems LOGIQ ?200, Руководство по обслуживанию, Страница: 20 / 212

GE MEDICAL SYSTEMS
LOGIQ
α
200 SERVICE MANUAL
2138853
INTRODUCTION
1–4
REV 0
1–2 SAFETY
1–2–1 Warnings
WARNING!
CAREFULLY READ ALL THE WARNINGS LISTED BELOW!
1. The operator manual should be fully read and understood before operating the LOGIQ
α
200 and kept nearby
for quick reference.
2. Although the ultrasound energy transmitted from the LOGIQ
α
200 transducer is within AIUM/NEMA
standards, unnecessary exposure should be avoided. Only trained personnel should operate the LOGIQ
α
200.
3. To prevent electrical shock, the LOGIQ
α
200 should be connected to a properly grounded power receptacle.
Do not use a three to two prong adapter. This defeats safety grounding.
4. Do not use with Defibrillator when LOGIQ
α
200 is being operated .
5. Probes are fragile, please handle with care.
6. Concerning Outside Markings, refer to Illustration 1–1, 1–2, 1–3, 1–4, 1–5, 1–6, 1–7, 1–8, and 1–9.
7. For the cleaning, disinfection, and sterilization, refer to Probe section in LOGIQ
α
200 User Manual and
Caution Sheet supplied with each probe.
NOTICE
This medical equipment is approved, in terms of the prevention of radio wave interference, to be
used in hospitals, clinics and other institutions which are environmentally qualified. The use of
this equipment in an inappropriate environment may cause some electronic interference to radios
and televisions around the equipment. Proper handling of this equipment is required in order to
avoid such trouble according to the operator and service manuals.
This equipment can be used in residential areas only under the supervision of physicians or
qualified technicians.