GE Medical Systems LOGIQ ?200, Руководство по обслуживанию, Страница: 166 / 212

GE MEDICAL SYSTEMS
LOGIQ
α
200 SERVICE MANUAL
2138853
6–82 RENEWAL PARTS
REV 5
6–2–37 Rear Panel Assy (FRU No. 415)
Time Required
0.5 Hour
Tool Required
Screwdriver
Procedure
Refer to ILLUSTRATION 6–43.
1. Turn OFF the system.
2.
Remove the Left Cover (FRU 404). Refer to 6–2–27.
3.
Remove the Right Cover(FRU 405). Refer to 6–2–28.
4.
Remove the Rear Cover (FRU 408). Refer to 6–2–31.
5.
Remove the EMI Cover (FRU 421). Refer to 6–2–39.
6.
Disconnect all connectors out of the Rear Panel assy. If necessary, cut tie wraps. Connectors are listed
below.
a. Unscrew and disconnect three ring terminals (1A, 2A and 5A) from the Terminal Block 6 Assy. Refer to
6–2–46, ILLUSTRATION 6–52.
b. Disconnect four connectors (J2,J3,J6 and J8) from the Mother Assy. For each cable, refer to 6–2–22,
ILLUSTRATION 6–28.
7.
Unscrew four screws (1 – 4) and pull the Rear Panel Assy out.
8.
Remove the Rear Panel Assy.