29
5.5. Increase Rebuild Speed
If the RAID array is being rebuilt during playback, the rebuild speed will slow down significantly.
To resume highest rebuild speed after playback is finished, go to
Admin
Panel
Login
Storage System Management
menu
(please refer to Figure 32). Then, click
Increase Rebuild Speed
button. This will immediately set RAID array to rebuild at highest speed.
Figure 32 Increase Rebuild Speed [Storage System Management].
5.6. Disabled options when using the 1x eSATA
Connection
The following options are disabled when using the PSD-3000-P (1x eSATA) content option:
Add Disk to RAID Array
– This is done automatically.
Import RAID Array
– No longer necessary
Remove Disk from RAID Array
– No longer necessary
6.
SX-3000 IP Setup
The IP address of the SOM and SX-3000 IMB will need to be set for proper operation. The SOM
and the IMB IP are to be on the same subnet.
