34
7.1.1. Barco Touch Panel Setup
The Barco Projector touch panel can be used to control the SX-3000. Use the following steps to
set up control of the SX-3000 from the Barco touch panel.
1. On the Barco touch panel, select [Control]
[Server]. The new window [Connection
Properties] will appear as shown in Figure 39.
Figure 39 Barco touch panel settings [Connection Properties].
2. Enter the SOM IP address of the SX-3000 into the
“Host Name” field. The remaining
fields should be filled in as follows (please refer to Figure 40):
Display or port: 5900
Check the [Use as port] checkbox
Password: gdcvnc
Figure 40 Barco touch panel settings [VNC Viewer Connection].
3. Click the [Connect now] button, the SMS user interface will be shown on the Barco
touch panel.
