28
5.2. Hard Disk Information
The PSD-3000-P is seen by the SX-3000 as a hardware RAID. When the hard disk information
check is done the RAID set will show as one drive, like below:
Figure 31 Hard disk information [Storage System Management].
5.3. RAID Status
When the RAID is rebuilding, the
[Monitor RAID Status]
section displays the rebuilding progress
as normal function to the previous RAID setup.
5.4. Creating a new RAID Array
When creating a new RAID array the option to select the drives seen in previous systems is no
longer needed. After selecting
[Create New RAID Array]
a confirmation page will pop up to
confirm the decision.
The new RAID creation will take just 1-2 minutes.
