39
The settings for 3D output control (
‘3D Sync Polarity’, ‘Dark Time’, ‘Output Delay’ and ‘Phase
Delay’) should be customized according to the type of 3D system used (RealD, XpanD or
Dolby3D).
If a particular model of the projector is capable of HFR 3D, It is required to setup different 3D
setting for different frame rates. This will ensure all channels have a corresponding 3D macro for
each refresh rate. For example, 6:2 for 24fpeps, 4:2 for 48fpeps, and 2:2 for 60fpeps.
7.5. IMB 3D macro settings changes
Server software version 9.0 makes changes to the IMB 3D output format. The following projector
macro changes are required to support these changes.
Note:
These are required changes on the projector. IMB 3D output will not function properly unless these
changes are made.
The SX-3000 with the Software version 9.0 will always enable the
“IMB 3D output in ‘4:4:4’”
format.
Figure 48 IMB 3D 4:4:4 configuration on SX-3000.
7.5.1. Series 2 Projector 3D Macro Settings
Since t
he ‘IMB 3D 4:4:4’ option is checked in SMS configuration, providing automatic 4:4:4 output.
All 3D macros within the projector
should be changed to use ‘4:4:4’ input.
