GCC Technologies P3-60, Руководство пользователя

Страница: 69 / 179

Puma III User Manual
Automatic-Aligning System 5-2
5.2 AAS Contour Cutting System
The AAS system has one calibration procedures to ensure maximum accuracy of AAS
operation. To operate the AAS you need to learn about the method of media feeding firstly.
(Refer to 4.1 Media Loading.)
5.2.1 Notice for Registration Marks
The first registration mark is designed to be different in order to identify the origin for AAS
auto-detection. The following precaution must be aware for registration marks to be read
automatically.

Type of media

Registration mark pattern

Reading range required for detection the registration marks

Position for registration marks and medium
The registration marks have to be:

Created by cutting software like SignPal or GCC CorelDRAW plug-in

In black color (printing quality of registration marks is essential; incorrect,
misaligned colors, blurry or smeared printout might leading to inaccurate cutting
result)

Length: The length of marks

Range: 5mm~50mm

Optimized Setting: 25mm

Thickness: The line thickness of marks

Range: 1mm~2mm

Optimized Setting: 1mm

Margin: The distance between marks and images

Range: 0mm~50mm

Optimized Setting: 5mm
The cutter can not detect the marks while:

Cutter carriage is not located near the outside area of first mark before
detecting (See the picture in page 5-7 for auto-detecting area of first mark.)

Medium thickness is more than 0.8mm

Transparent medium is used

Non-monochrome drawing. The marks can’t be read if is printed on colored
medium

Dirty or creased medium surface