GCC Technologies LaserPro C180II, Руководство пользователя

Страница: 121 / 141

121 232001840G(08)
7.3 Honeycomb Table Option
Honeycomb tables are important to tune out a beautiful output when working with cutting operations. The
C180II has a very easy to install honeycomb table. Simply lay it on top and against the upper left corner of the
working area for use.
7.4 Focal Lens Option
GCC offers four different focal lenses namely the 1.5”, 2.0”, 2.5”, and 4.0” for different applications. The number
description, 1.5”, 2.0”, 2.5”, and 4.0” signifies the distance of where passed through beam will converge. For
example, when a laser beam passes through a 2.0” focus lens, the beam will converge at a 2.0” distance
resulting in a concentration of energy at that spot.
The resulting spot size from the different focus lens are also different and the following chart shows the different
spot sizes achieved from the different lenses.
y 1.5” Lens: The 1.5” lens is best when used for engraving of very fine details
y 2.0” Lens: The 2.0” lenses are good for normal engraving and cutting of up to 10mm thick acrylic
Engraving effects achieved with the different lenses
Cutting edges achieved with the different lenses
Thumbscrew
Unscrew the three thumb screws on
lens carriage to remove the carriage
panel. Take out the lens carriage and
insert the optional one for different
applications.