GCC Technologies 21 Series, Руководство пользователя

Страница: 74 / 275

2-24
Paper Source: Specifies which paper tray the paper is to be drawn from. The options on the
pull-down menu are as follows:
Auto Select - Sends job to the tray on the printer
holding the paper size specified in the document.
Tray 1 - Sends the job to the Multi-Purpose
Feeder (Tray 1) of the printer
Tray 2-4 - Sends the job to the standard lower
paper tray of the printer (Tray 2) or an additional
lower paper tray (Tray 3-4), if present. Trays that
are not installed are greyed out.
Envelope Feeder - Sends the job to the enve-
lope feeder. Greyed out unless the feeder is
installed.
Manual Feed - Sends the job to the Multi-
Purpose Feeder (Tray 1). You will be prompted to
press the Select button on the front panel before
the job is printed.
This pull-down menu also contains selections for
Paper Type (Plain Paper, Preprinted, Letterhead,
Transparency, Prepunched, Labels, Bond,
Recycled, Color, Card Stock, Rough, Normal 1, 2
and 3 and Thick 1 and 2). Select the appropriate
type for each source, or use Auto Select to
automatically select the paper type.
These settings are used to automatically direct
output to the correct tray. For example, if the Tray
1 Type on the printer’s front panel has been set to
“Letterhead,” selecting “Letterhead” from this
menu will automatically send the job to Tray 1.
The Paper Source options also allow a different source to be specified for the first page of a
document than for the remaining pages. This is useful when printing correspondence with the
first page on letterhead and remaining pages on plain paper, for example. To print the first page
from a different source, select a Paper Source for both the “First Page From” and “Remaining
From” categories. Otherwise, select “All From” to print all pages from the same tray.