GCC Technologies 21 Series, Руководство пользователя

Страница: 60 / 275

2-10
Part 2b - Creating a Desktop Printer (via EtherTalk)
1. Confirm that the Macintosh is properly
configured to communicate over EtherTalk.
Go to the Apple menu, then to Control
Panels and to AppleTalk. In the AppleTalk
window, confirm that the “Connect via:”
selection is set to Ethernet. Close the
control panel. Click Save if prompted to
save settings.
2. Make sure that all steps in the Hardware
Setup section of this manual have been fol-
lowed. Follow the Macintosh installation
steps in Part 1 of this section. In Step 9,
select “AppleTalk” as the connection
method and click “Setup Printer.”
Due to potential incompatibilities between Apple’s Desktop Printer Utility and certain AppleTalk
networks, GCC does not recommend using the Apple Desktop Printer Utility to set up the Elite
21 series printer over EtherTalk. As a result, the Elite 21 Series software uses the Chooser to
set up the printer over EtherTalk rather than the Desktop Printer Utility. Follow these steps to
setup your printer over an EtherTalk connection.