GCC Technologies 21 Series, Руководство пользователя

Страница: 153 / 275

6-8
5. Printing
This menu controls items related to print quality. Items can be changed by using
the Value key and pressing Select to confirm the change. The items are as
follows:
• Copies: Controls the default number of copies of a document that are printed
if no number is specified within the print job. Default is 1 copy, this value can
be set from 1 to 999.
• Default Size: Specifies the default paper size used if no paper size is
specified in the print job. Default is US Letter (110V models) or A4 (220V
models).
• Append CR to LF: Appends a carriage return to the end of each line of a
plain-text PCL job to allow the job to print out with proper formatting. Default
is Enabled.
• Print Errors: Specifies whether the printer will automatically generate a
detailed report of any PostScript printer errors. Default is Disabled.
6. Configuration
This menu controls items related to the way that basic functions of the printer are
configured. The items are as follows:
• Energy Save: Controls amount of time that the printer will remain idle before
switching to Energy Save mode. Default is 15 minutes.
• Collation Mode*: Sets whether collation is handled by the printer or by the
computer. If Disabled, the printer driver on the computer will send the job
once for each collated copy. If Enabled, the driver will send the job once and
the printer will hold the job in memory and generate subsequent copies
automatically. This mode is faster, but takes up more memory.
• RAM Disk (MB)*: Allows a portion of the printer’s RAM to be set aside as a
RAM Disk. This area can store often-used fonts, held jobs, etc. to speed up
processing time. This reduces the amount of available processing RAM,
however, and is only recommended in cases where the printer’s RAM has
been upgraded. Default is Disabled.
• Hold Last Job*: Sets the Held Job feature described under the Held Job
menu (see #1) to Enabled or Disabled.