GCC Technologies 21 Series, Руководство пользователя

Страница: 188 / 275

7-33
Dick's printer down the hall [Enter]
• Select exit to save your configuration and press [Enter].
You are now prepared to print.
Setting Up a SCO UNIX Remote Printer to Use lpd/lpr
Set up a remote printer on the host that sends jobs to a printer using lpd. Use
the following procedures to do this:
• At the prompt, type:
mkdev rlp
Note: You cannot run mkdev rlp twice. If you have additional printers to be
configured, use the rlpconf command.
• You will now be asked a series of questions. Respond as follows. Do you
want to install or remove a remote printer? Type: I
• Do you want to change printer description file /etc/printcap? Type: Y
• Write a printer name. For example, type:
lprprinter1
• Is lprprinter1 a remote printer or a local printer? Type: R
• Enter remote host name: type host name entered in printcap for Print
Server Card. For example, type:
lprprinter
• Confirm the information you have entered. Type: Y
• Confirm the preceding connection as your system default. Type: Y
• Enter another printer name or quit setup. Type: Q
• Do you want to start the remote daemon now? Type: Y
• Using a line editor of your choice, edit the /etc/printcap file by changing the
:rp= entry to PORT1. For example,
printer1:\
:lp=:\
(used to specify the device name for a local printer; this field must be empty)
:rm=lprprinter:\
(remote machine name or network name of the print server)
:rp=PORT1:\
(remote printer name or the name of the print server)
:sd=/usr/spool/lpd/printer1:
(name of the spool directory on the client)
Setting Up System V Release 4 and Solaris 2.X to Use lpd/lpr
If your system recognizes the LPSYSTEM command, you can use lpd/lpr.
Another option is the admintool if your system supports it.