Page 8 - 6
Maintenance
Titan 110/ 165 Operation and Maintenance Manual
© GBC Films Group November 2000
Rollers only turn in reverse while
depressing .
INFORMATION
REVERSE
h) Repeat steps “ a ” through “ f ” until the adhsive
is beaded on the rollers.
Cleaning the beads of
adhesives, dust and dirt
a) Press
on both tenperature controls.
b) Use a damp cloth to clean the beads of
adhesives off of the rollers.
c) Replace the feed table and lower the front
safety shield.
INFORMATION
Locator latches on the pressure plate are
not associated with an interlock switch.
The laminator can operate without
the pressure plate installed.
d) Press
R E V E R S E
.
