![background image](http://html1.mh-extra.com/html/gbc/titan-110/titan-110_operation-and-maintenance-manual_3898577082.webp)
Page 6 - 7
Applications
Titan 110/ 165 Operation and Maintenance Manual
© GBC Films Group November 2000
f) Lower the rollers to the appropriate position
with regards to the thickness of the substrate
being used.
g) Position one hand on the image against the
upper main roller and the use the other hand to
grip the release liner.
h) Press on the footswitch and pull the release liner
as the board enters the main roller nip. Do not
let go of the image until it the edge reaches the
center of the upper roller.
i) Release the footswitch once the board has
passed through the pull rollers.
i) Raise the rollers.
CAUTION
Do not use the rear cut-off blade to
trim the substrate! You can
damage the blade.