![background image](http://html1.mh-extra.com/html/gbc/titan-110/titan-110_operation-and-maintenance-manual_3898577054.webp)
Page 4 - 17
Installation
Titan 110/ 165 Operation and Maintenance Manual
© GBC Films Group November 2000
4.8 Roller handle
The roller handle raises and lowers the main rollers
and the pull rollers simultaneously. The roller handle guide
is notched with preset nip heights. The roller handle is
located on the right side of the laminator.
W A R N I N G
Keep hands and fingers clear of the
laminator roller nip when changing GAP.
Y o u c a n b e C R U S H E D o r B U R N E D !
a) Pull the handle away from the notch and rotate
toward the rear of the machine. The upper main
roller and the upper pull roller lowers.
CAUTION
Never leave the rollers in the down position
without rolling. Prolonged contact in one
area can form flat spots on the rollers.
b) Rotate the handle towards the front of the
machine. The upper main roller and the upper
pull roller raise up.