![background image](http://html1.mh-extra.com/html/gbc/titan-110/titan-110_operation-and-maintenance-manual_3898577047.webp)
Page 4 - 10
Installation
Titan 110/ 165 Operation and Maintenance Manual
© GBC Films Group November 2000
c) Move all packing materials to a safe distance
from the laminator and dispose of properly.
d) Use two people to carefully roll the laminator to
the desired location.
About recycling: The crate components can
be reused for shipping the laminator again
or can be disassembled and the wood and
screws recycled. The shrink wrap is not
recyclable, so it must be discarded.
INFORMATION
e) Use Figure 4.1.1 for the suggested floor
layout and plug the laminator into the proper
receptacle outlet.
4.6 Safety check
The safety check will ensure that all safety devices
and interlock switches are functioning properly.
W A R N I N G
Do not wear ties, loose fitting clothes or
dangling jewelry while operating or
servicing the laminator. These items can get
caught in the nip and choke you or you can
be crushed or burned.
W A R N I N G
If a safety feature is not functioning
properly, contact your local service
representative immediately
D A N G E R
At no time should you attempt to over ride
any of the safety latches on the laminator.