Page 1 - 12
Safety
Titan 110/ 165 Operation and Maintenance Manual
© GBC Films Group November 2000
Ensure the roll of laminate is loaded
properly on the unwind shaft.
Exposed adhesive should be facing
away from the heated components.
This will prevent hours of cleaning!
CAUTION
Caution should always be exercised
when using the laminator with
the safety shields removed.
You can be seriously HURT or INJURED!
W A R N I N G
W A R N I N G
Keep hands and fingers clear of the
laminator roller nip when changing GAP.
Y o u c a n b e C R U S H E D o r B U R N E D !
INFORMATION
Speed can be increased during operation.
INFORMATION
The Titan 110 is used for illustration
purposes. The procedure is the same
for the Titan 165.
Avoid tacking at the ends first and pressing
towards the center, you may create a tunnel
once you have reached the center. This will
make for a difficult mounting application.
INFORMATION
CAUTION
Do not use the rear cut-off blade to
trim the substrate! You can
damage the blade.
Ensure the roll of laminate is loaded
properly on the unwind shaft.
Exposed adhesive should be facing
away from the heated components.
This will prevent hours of cleaning!
CAUTION
