Page 6 - 5
Applications
Titan 110/ 165 Operation and Maintenance Manual
© GBC Films Group November 2000
q) After the last image has cleared the rear cut-off
blade, trim the web from the laminator.
r) Raise the rollers.
s) Remove the web from the laminator and clean
any adhesive that may have contacted the
rollers.
6.2 Mounting
Follow the procedure below to use the Titan 110/
165 for pressure sensitive mounting.
Materials need
• Images with laminate and mount adhesive
( typical decal )
• Substrate
( compatible with the mount adhesive used )
INFORMATION
The Titan 110 is used for illustration
purposes. The procedure is the same
for the Titan 165.
a) Press power to “ ON ”.
