Page 4 - 12
Installation
Titan 110/ 165 Operation and Maintenance Manual
© GBC Films Group November 2000
Front safety shield
Caution should always be exercised
when using the laminator with
the safety shields raised.
Y o u c a n b e s e r i o u s l y H U R T o r I N J U R E D !
W A R N I N G
a) Raise the front safety shield. Bottom rollers
stop.
b) Lower the front safety shield to its fully closed
position, the bottom rollers revert to turning.
INFORMATION
The laminator will operate only when
all safety latches are in the fully
latched position.
Emergency stops
a) Press the front emergency stop ( E-STOP )
down. The bottom rollers stop turning.
b) Rotate the E-STOP clockwise to reset. The
bottom rollers revert to turning
c) Repeat steps “a” and “b” for the rear E-STOP.