Page 4 - 8
Installation
Titan 110/ 165 Operation and Maintenance Manual
© GBC Films Group November 2000
4.5 Crated
W A R N I N G
The unpacking process requires at least two
people. You can be severely injured, crushed
or cause damage to the laminator.
Tools required
• # 2 Phillips head screwdriver
• Large adjustable wrench
• Crow bar
• A second person
To uncrate the laminator
a) Remove the top of the crate and then the sides
in the order shown in Figure 4.5.1
CAUTION
Do not allow the top to fall into the crate. It
can damage the laminator.
INFORMATION
Do not put packing screws on the floor.
They can cause problems when trying to roll
the laminator into position or you can
become injured if stepped on.
CAUTION
A second person must support the side
labeled 5 in Figure 4.5.1 It can fall and
damage the laminator or cause harm to you
and others.
Figure 4.5.1 Disassembling of the crate
1
2
3
4
5
