GBC FusionPunch II, Руководство пользователя

Страница: 131 / 132

Glossary G-7
G
Right Punch Door
- the narrow door in the front of the Punch cabinet that,
when opened, allows access to various adjustment knobs and to the Slug
(punched paper chaff) Bin, which must be emptied periodically.
Setting the Backgauge
- an adjustment procedure that is done to ensure
that the margin between the leading edge of the paper and the punched holes
is correct.
Setting the Side Guide
- an adjustment procedure that is done to ensure
that each sheet of paper maintains registration as it passes through the Die
Set to be punched.
Sheet Eject Strap Assembly
- an assembly consisting of a steel rail and
three spring steel straps, that is used to tension the paper just before it enters
the Die Set. The Sheet Eject Strap assembly is hinged and can be opened to
clear paper jams.
Side Guide
- a small, contoured paper guide made of sheet metal and
located under the Sheet Eject Strap Assembly, to the right of the Infeed
Guide. The Side Guide is adjustable and is used in
Setting the Side Guide ,
described above.
Stacker
- the finishing device that follows the FusionPunch II. The Stacker
receives the punched output from the FusionPunch II and stacks it on an
internal tray that will hold 2500 sheets of paper. When the Stacker Tray is
full, the operator removes the stacked documents and generally transfers
them to a separate area for offline binding.