![background image](http://html1.mh-extra.com/html/gbc/advancedpunch/advancedpunch_technical-and-service-manual_571056022.webp)
Section 1
1-10
© Copyright 2009 GBC. All rights reserved.
Advanced Punch Service Manual
1.4 Inspection, Cleaning, and Lubrication
If operating properly, the Advanced Punch will punch the same types of copy
paper and cover materials
handled by the printer and run at the same speed.
Hole quality will vary between different grades of paper.
The following maintenance should be performed according to the schedule.
AdvancedPunch Maintenance Schedule
Note: cycles = sheets of paper punched, not impressions.
Table 1.3
.
Periodic Maintenance
Table 1.4
.
Replacement Maintenance
Table 1.2 Customer Maintenance
Area/Unit
Period
See:
Measures
Remarks
Punch die pins
50K cycles
Page 1-8
Lubricate
Oil the punch pins
Area/Unit
Period
Measures
Remarks
Aligner belt (green belt)
750K cycles
Page 4-20
Inspect and clean
Alcohol & rag
Aligner idler rollers
750K cycles
Page 1-16
Inspect and clean
Alcohol & rag
Aligner latching
mechanisms
750K cycles
Page 1-25
Inspect
Back gauge mechanism
750K cycles
Page 1-19
Inspect and clean
Vacuum
Base
750K cycles
Page 1-12
Clean
Vacuum
Die guide
750K cycles
Page 1-13
Clean
Vacuum
Door closing latch
750K cycles
Page 1-14
Inspect
Drive rollers
750K cycles
Page 1-24
Inspect and clean
Alcohol & rag
Hole alignment
750K cycles
Page 1-9
Inspect
Idler rollers
750K cycles
Page 1-20
Inspect and clean
Alcohol & rag
Optical sensors
750K cycles
Page 1-26
Clean
Air
Paper path, aligner
panels
750K cycles
Page 1-15
Inspect and clean
Alcohol & rag
Paper path, bypass
750K cycles
Page 1-28
Inspect and clean
Alcohol & rag
Paper path, punch
750K cycles
Page 1-29
Inspect and clean
Alcohol & rag
Roller energy drive
750K cycles
Page 4-35
Inspect
Timing belts
750K cycles
Page 1-31
Inspect
Brake, punch drive
3,000K cycles
Page 4-60
Inspect and clean
Clutch, Punch Drive
3,000K cycles
Page 4-55
Inspect and clean
Punch drive cams
3,000K cycles
Page 4-54
Lubricate
Grease
Area/Unit
Period
Measures
Remarks
Die set
500K cycles
Page 1-5
Replace as needed
Back gauge mechanism
3,000K cycles
Page 4-36
Replacement
P/N 001N00516
Содержание AdvancedPunch
