![background image](http://html1.mh-extra.com/html/gbc/advancedpunch/advancedpunch_technical-and-service-manual_571056176.webp)
Section 6
6-10
© Copyright 2009 GBC. All rights reserved.
Advanced Punch Service Manual
6.9 Principle of Operation
The GBC Advanced Punch is a machine that punches various die set hole
patterns into single sheets of paper. The machine is placed between a printer or
copier and a finisher. The punch has two paper paths.
•
The bypass section.
•
The punch path.
The bypass moves the paper from the printer to the finisher without punching
holes. The punch path routes the paper from the printer through the punch to be
punched and then routes the paper to the finisher. The punch path can be
selected by pressing the green button on the top of the Advanced Punch.
The Advanced Punch consists of several input and output devices to operate the machine
functions. The system intelligence is a Microchip micro-controller PIC17C752. The I/O
devices are listed in the tables below.
Refer to the electrical wiring information, when reading the following material. Also refer
to
6.9.1
Inputs
The input signals can be verified using the printer routines using NVMs.
Table 6.1Input Devices
Input
Type
Function
Sensor 1
Optical
Sheet speed measurement, misfeed detect
Sensor 2
Optical
Stepper 1 control, Sheet speed measurement, misfeed
detect
Sensor 3
Optical
Punch mechanism control, Backstop raiser, misfeed
detect
Sensor 4
Optical
misfeed detect at entrance of U-Channel
Sensor 5
Optical
Jam detection
Sensor 6
Optical
Stepper 2 Control, misfeed detect
Sensor 7
Optical
Exit sensor, misfeed detect
Sensor 8
Optical
Bypass sensor, Sheet speed measurement, misfeed
detect
Sensor 9
Optical Vane
Monitors rotation of punch mechanism, Controls clutch
and brake
Switch 2A
Mechanical
Interlock Voltage, no machine movement if door is open
Switch 2B
Mechanical
Door open signal
Switch 3
Mechanical
Chip tray switch
Switch 4
Mechanical
Die Set switch
Содержание AdvancedPunch
