![background image](http://html1.mh-extra.com/html/gbc/advancedpunch/advancedpunch_technical-and-service-manual_571056094.webp)
Section 4
4-36
© Copyright 2009 GBC. All rights reserved.
Advanced Punch Service Manual
4.8 Back Gauge Assembly
The Back Gauge assembly pauses the paper just as the edge has entered the die
set. Working properly, the sheet will pause only long enough for the holes to be
punched correctly. The Back Gauge assembly also controls the paper chad falling
into the chad bin, significantly reducing the amount of chad that could flow through
the paper path. Some chad falls outside the chad bin and should be cleaned up
with a vacuum cleaner during each servicing.
Warning:
Disconnect the Advanced Punch from its power source before
removing the Back Gauge assembly. Failure to observe this warning can result in
severe injury or death and damage the punch.
Maintenance Schedule
Clean every 750K cycles.
Replace every 3,000K cycles.
Procedure
Remove Back Gauge assembly to clean and service the solenoid or to replace the Back
Gauge. Also allows the removal of the Punch Module.
To repair or replace the Back Gauge, separate the Advanced Punch from the
printer and finisher and then remove the rear cover. See
Tools Required
•
Phillips screw driver or 1/4" nut driver
•
Diagonal wire cutter
Tip:
Empty the paper chip bin and replace it. This makes it easier to find
small parts that you may drop into the bin.
Содержание AdvancedPunch
