Gateway NV-53, Руководство по обслуживанию

Страница: 86 / 168

CHAPTER 3: Replacing notebook components
80
Replacing the USB board
Tools you need to complete this task:
Screws removed during this task:
•
1 black M2×5 (hard drive)
•
1 black M2.5×6 (optical drive)
•
3 black M2.5×6 (keyboard cover)
•
2 black M2.5×6 (LCD panel hinge - bottom)
•
2 black M2.5×6+Nylok (LCD panel hinge - top)
•
10 M2.5×6 black (palm rest - base side)
•
3 M2.5×6 black (palm rest - top side)
To replace the USB board:
1
Complete the steps in “Preparing the notebook” on page 47 .
2
Complete the steps in “Removing the battery” on page 48 .
3
Complete the steps in “Removing the bay cover” on page 49 .
4
If the notebook has a wireless card installed, unplug the antenna cables.
5
Remove the hard drive screw, and then
remove the hard drive from its
compartment
.
Phillips #0 screwdriver
Flat screwdriver or Non-marring plastic scribe