Gateway NV-53, Руководство по обслуживанию

Страница: 56 / 168

CHAPTER 3: Replacing notebook components
50
Adding or replacing memory modules
Tools you need to complete this task:
To add or replace memory modules:
1
Complete the steps in “Preparing the notebook” on page 47 .
2
Complete the steps in “Removing the bay cover” on page 49 .
3
If you are replacing a memory module, go to step 4 .
If you installing an additional memory module, go to step 6 .
4
Use a non-marring plastic scribe to push out the latches on both sides of
the memory slot until the module tilts upward.
5
Remove the memory module from its slot.
Important
Use only memory modules designed for this Gateway notebook.
Phillips #0 screwdriver
Non-marring plastic scribe