Gateway NV-53, Руководство по обслуживанию

Страница: 68 / 168

CHAPTER 3: Replacing notebook components
62
Replacing the keyboard
Tools you need to complete this task:
Screws removed during this task:
•
3 black M2.5×6 (keyboard cover)
To replace the keyboard:
1
Complete the steps in “Preparing the notebook” on page 47 .
2
Remove the keyboard cover by performing steps 2 – 6 of the “Replacing the
keyboard cover” procedure on page 58 .
3
Lift the back edge of the keyboard slightly, then carefully slide it toward the
LCD panel to release the keyboard retaining tabs from the palm rest.
4
Flip the keyboard over onto the touchpad area to access to the keyboard
cable
(a) .
Open the keyboard cable connector (b) and disconnect the cable (c) .
Caution
The keyboard is connected to the notebook through the keyboard
cable. Disconnect this cable first before pulling the keyboard away
from the palm rest.
Phillips #0 screwdriver
Flat screwdriver or Non-marring plastic scribe