Gates GC96, Руководство оператора

Страница: 3 / 24

9/5/2007 2
NOTE ON POWER SOURCE:
The GC96 has been designed to accept power from 20amp 220-250VAC outlets.
Power regulated and not exceeding these specifications will allow your GC96 crimper to
operate without any electrical fault.
Supply Voltages exceeding this specification will cause damage to your crimper. Poorly
regulated power in some areas can easily fluctuate outside of the crimper inverter
range.
To insure long lasting use of the GC96 crimper it is important that a certified
electrician qualify that the supply voltage is within the specified voltage range and
will not be exceeded in that region. If the certified electrician determines that the
electricity is poorly regulated in your area, steps must be taken to alleviate the problem
prior to operation of the GC96 crimper.
Serial number:______________ Purchase date:________________
Table of Contents
Specifications
Setup
Stand Assembly
Rack Assembly
Calibration with GC32-33 die and the GC96 Spacer die
Calibration with GC96-610 die and the GC96 Calibration piece
Using GC96 and GC32 series die sets
GC96 Display Panel Operation
Hose Preparation
Crimping Instructions
Measuring Crimp Diameter
Maintenance
Trouble Shooting Guide
Schematic and Replacement Parts List