Hand Tool for .093" Pin and Socket Crimp Terminals and Claspcon™ Crimp Terminal Socket
Doc No: ATS-638117100
Release Date: 02-12-07
UNCONTROLLED COPY
Page 1 of 6
Revision: B
Revision Date: 03-28-08
INSULATION
CRIMP
BRUSH
STRIP
LENGTH
BELL MOUTH
CRIMP HEIGHT
BEND
DOWN
BEND UP
ROLLING
CONDUCTOR
CRIMP
TWISTING
TYPE 2C
HAND CRIMP TOOL
SPECIFICATION SHEET
Order No. 63811-7100
FEATURES
A full cycle ratcheting hand tool ensures complete crimps
Ergonomic soft grip handles for comfortable crimping
A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position
This tool is IPC/WHMA-A-620 Class 2 and RoHS compliant
SCOPE
Products: .093” Pin and Socket 14-18 AWG and 24-30 AWG and Claspcon™ Crimp Terminal Socket 24-30 AWG
Terminal Order No.
Wire Size
Insulation Diameter
Strip Length
Terminal
Series No.
Loose Piece
Reel
AWG
mm²
mm
In.
mm
In.
02-09-1141 39-00-0318 02-09-1142 39-00-0317
02-09-1144 39-00-0320 02-09-5146 39-00-0319
02-09-5147 39-00-0322 39-00-0315 39-00-0321
1433
39-00-0316
24-30 0.20-0.05 0.76-1.52
.030-.060 3.96-5.53 .156-.218
02-09-2143 39-00-0324 02-09-2141 39-00-0325
02-09-6145 39-00-0326 02-09-2149 39-00-0323
1434
02-09-6144
24-30 0.20-0.05 0.76-1.52
.030-.060 3.96-5.53 .156-.218
1881-3
02-08-1104
02-08-1103
24-30 0.20-0.05 0.76-1.52
.030-.060 3.96-5.53 .156-.218
42477
02-09-1615
14-18 2.00-0.80 2.36-3.55
.093-.140 3.96-5.53 .156-.218
42478
02-09-2612
02-09-2611
14-18 2.00-0.80 2.36-3.55
.093-.140 3.96-5.53 .156-.218
Follow the Cut-Off Tab specifications on Applicator specification sheets. These Terminals in the 1433, 1434, and 1881 series
cannot be removed from the reel by manual cutting. An applicator must be used or the terminals will not function properly.
See Conditions on page 2.
DEFINITION OF TERMS
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the
scope.
