9/5/2007
23
TWO-YEAR LIMITED WARRANTY ON
EQUIPMENT
For two years from the date of shipment of the equipment to the original user, Gates
Corporation will, at its option, replace or repair any unit which proves to be defective in
material or workmanship, or both, at no cost to the original user of the equipment. This
is the exclusive remedy. THERE IS NO OTHER EXPRESS OR IMPLIED WARRANTY.
ALL INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR FROM DATE OF
SHIPMENT OF THE EQUIPMENT TO THE ORIGINAL USER. LIABILITY FOR
CONSEQUENTIAL AND INCIDENTAL DAMAGES UNDER ANY AND ALL
WARRANTIES IS EXCLUDED TO THE EXTENT EXCLUSION IS PERMITTED BY
LAW. Some states do not allow the exclusion of incidental or consequential damages,
and some states do not allow limitation on how long an implied warranty lasts, so the
above limitation and exclusions may not apply to you. This warranty gives you specific
legal rights and you may also have other rights which vary from state to state. For
warranty service, contact Service Department, Gates Corporation, 1551 Wewatta
Street, P.O. Box 5887, Denver, CO 80217.
How to Order Repair Parts
All parts for the GC96 Crimper listed in the
current replacement parts price sheets
can be ordered directly from Gates Corporation, Iola Distribution Center, 999 Michigan
Avenue, P.O. Box 606, Iola, KS 66749, Phone (316) 365-6961.
When ordering, be sure to include the following information:
1. Name of unit shown on front.
2. Product number or part number of parts needed.
3. Description of parts needed.
4. Quantity of parts needed.
5. Serial number of machine.
For selling prices on inventoried parts, refer to
Hydraulic Equipment and Parts List
Price Schedule.
Selling prices for parts not shown in these lists will be furnished on
request, or parts will be shipped at prevailing prices and you will be billed accordingly.
For information regarding prices, contact your local Gates representative or Gates
Corporation, 1551 Wewatta Street, P.O. Box 5887, Denver, CO 80217.
When returning inoperable equipment, contact your Gates sales representative and
request a return good authorization form. Fill out and send to:
Gates Corporation
Attention: Fluid Power Product Application.
1551 Wewatta Street
P.O. Box 5887
Denver, Colorado 80217-5887
www.gates.com
Содержание GC96
Страница 22: ...9 5 2007 21 SCHEMATIC...