Gates Underwater Products EX1R Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 26

background image

Gates Underwater Products, Inc

13685 Stowe Drive • Poway, CA • 92064 • 858.391.0052 • 800.875.1052 • 858.391.0053

[email protected] • www.GatesHousings.com

14

01/13/10

Power

This control is

green

and located on the rear shell. It is rotated slightly counterclockwise

to set ‘camera’ mode. The camera switch can be seen through the rear window to
confirm control operation.

Record/Standby

The Record Standby control is

red

and operates by a counterclockwise motion on the

lever trigger. Press once to record, press again for Standby. You will ‘feel’ the
record/standby button on the camera actuate through the control as it is depressed.
This control will return to its neutral position automatically.

Zoom

The Zoom control, identified by a

blue

color, is operated by a slight rotation in either

direction.

Manual Iris

The Manual Iris control rotates the iris ring on the camera. Note the red lockout collar on
the control (refer to photo). With the pointer in the vertical position, the Manual Iris
control is ‘locked out’ from touching the iris ring of the camera. This is to prevent
damage to the camera when engaging auto iris.

To use the Manual Iris control be sure to set the camera into manual iris mode with the
Auto / Manual Iris control (see above). Then slightly retract the Lockout Collar and
Manual Iris knob, rotate 90 degrees in either direction, then push the control back in so
the guide pin on the Lockout Collar mates with the slot on the housing. The Manual Iris
control will now actuate the manual iris ring on the camera.

a

Caution

:

Ensure the camera is in NOT in ‘Full Auto’ mode, and manual iris is

engaged before releasing the Lockout Collar on the Manual Iris control. Failure to do so
may result in camera damage.

a

Caution

:

The Manual Iris control must be locked out during power up/down of the

camera as the iris ring rotates during this action. Failure to do so may result in camera
damage.

Position the Lockout Collar here to

use the Manual Iris control.

Position the Lockout Collar here to

prevent contact with the manual iris

ring of the camera.

«
...
12
13
14
15
16
...
»

Содержание EX1R



























Отзывы:

Нет отзывов

Похожие инструкции для EX1R

I-Class Mark II

Бренд: Datamax Страницы: 12

Бренд: KARPO Fly Страницы: 13

Бренд: B-TEK Scales Страницы: 3

Бренд: B-Speech Страницы: 18

Бренд: B-PWR Страницы: 12

Бренд: Quincy lab Страницы: 4

Бренд: Dakota Alert Страницы: 2

Бренд: DAINCUBE Страницы: 38

Бренд: Farenheit Страницы: 8

Fast PLUG 500 premium

Бренд: SAGEMCOM Страницы: 2

Бренд: NATURE & DECOUVERTES Страницы: 13

6130N - Phaser Color Laser Printer

Бренд: Xerox Страницы: 2

Бренд: Varta Страницы: 132

Бренд: Omron Страницы: 12

SANTA FCB-XM-CH0084-120V

Бренд: GE Страницы: 2

Бренд: Standby Страницы: 10

Бренд: Leisure Concepts Страницы: 2

Inflatable Stand Up Paddle Board

Бренд: Kings Adventure Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды